How the convergence of Wi-Fi 7 (802.11be) silicon and RADWIN’s deterministic PtMP innovations changes the economics of wireless broadband — delivering up to 10 Gbps per sector and 40 km range.
Sector Capacity
Max Coverage Range
Base
1. The Outdoor Paradigm: Why Wi-Fi 7 Matters for Fixed Wireless
Wi-Fi 7 (IEEE 802.11be) is predominantly recognized as the next-generation standard powering high-end consumer smartphones, laptops, and indoor access points. However, for Fixed Wireless Access (FWA) service providers, telcos, and critical-network operators, the far greater financial and operational opportunity lies outdoors.
Historically, extending wireless broadband across rural, suburban, and semi-urban clusters required choosing between expensive millimeter-wave (mmWave) links with short line-of-sight reach, or legacy sub-6 GHz Point-to-Multipoint (PtMP) systems constrained by capacity bottlenecks and susceptibility to spectral noise. Wi-Fi 7 fundamentally disrupts this trade-off by introducing massive channel widths (up to 320 MHz), 4096-QAM (4K-QAM) modulation, and Multi-Link Operation (MLO).
2. The Engineering Barrier: Why Standard Wi-Fi Fails Outdoors
While standard Wi-Fi 7 silicon provides raw PHY throughput, off-the-shelf consumer Wi-Fi protocols fail dramatically in outdoor carrier deployments due to inherent design limitations:
- Contention-Based MAC (CSMA/CA): Indoor Wi-Fi relies on “listen before talk.” Over distances of 5 to 40 km with dozens of remote subscriber units, collision rates skyrocket due to the “hidden node” problem, causing total throughput collapse.
- Non-Deterministic Latency: Standard Wi-Fi cannot guarantee strict Quality of Service (QoS), jitter thresholds, or committed information rates (CIR) demanded by business SLAs, VoIP, and mission-critical networks.
- Asymmetric Range & RF Noise: Dense outdoor spectral clutter causes standard radios to constantly back off, throttling transmission rates across entire sectors.
3. The RADWIN QORA™ Innovation: Carrier-Grade Determinism
To overcome these limitations, RADWIN developed QORA™ — an enterprise-grade PtMP platform built on advanced Wi-Fi 7 silicon combined with RADWIN’s proprietary air-interface protocols, dynamic beamforming, and dedicated carrier MAC layer.
By replacing collision-prone contention mechanisms with deterministic scheduled transmission, RADWIN QORA unlocks:
- Up to 10 Gbps per Sector: Meeting the soaring peak-capacity demands driven by cloud migrations, high-resolution streaming, and AI workloads.
- Long-Range Reach up to 40 km: Enabling cost-effective coverage across vast geographic spans without compromising link stability.
- Advanced NLOS & Interference Mitigation: Maintaining reliable links in challenging non-line-of-sight environments and densely congested radio frequencies.
- Multi-Tenant Convergence: Delivering residential, business-tier (guaranteed SLA), and industrial telemetry services concurrently over a single unified sector.
4. Technical Specifications & Performance Matrix
Frequently Asked Questions (FAQ)
Everything network engineers and fixed wireless operators need to know about Wi-Fi 7 outdoor deployment and the RADWIN QORA™ architecture.
What is Wi-Fi 7 Fixed Wireless Access (FWA) and how does it differ from consumer Wi-Fi 7?
Consumer Wi-Fi 7 is designed for short-range indoor device connectivity (typically under 30 meters) using uncoordinated contention protocols (CSMA/CA). In contrast, Wi-Fi 7 Fixed Wireless Access (FWA) leverages the underlying 802.11be physical layer (320 MHz channels, 4096-QAM modulation, and massive spatial streams) but adapts it for outdoor point-to-multipoint links spanning up to 40 km. RADWIN integrates proprietary carrier MAC layer protocols on top of Wi-Fi 7 silicon to prevent collisions, enforce SLA determinism, and deliver true fiber-grade wireless broadband.
Why can't operators just deploy standard off-the-shelf indoor Wi-Fi 7 outdoor routers for PtMP networks?
Standard off-the-shelf Wi-Fi chipsets rely on collision-avoidance mechanisms that fail completely outdoors over distance. The “hidden node problem” causes remote subscriber units to transmit simultaneously without hearing each other, leading to packet collisions, catastrophic retransmission penalties, and erratic latency. Furthermore, off-the-shelf equipment lacks beamforming gain, robust non-line-of-sight (NLOS) processing, and carrier-grade interference mitigation required to survive in congested outdoor spectrum.
How does RADWIN QORA achieve up to 10 Gbps per sector and 40 km range?
RADWIN QORA™ combines the extreme throughput of Wi-Fi 7 silicon with RADWIN’s proprietary scheduled MAC layer, high-gain smart beamforming antennas, and dynamic resource allocation. By coordinating time slots deterministically, QORA eliminates packet collisions and maximizes spectral efficiency, allowing full multi-gigabit throughput to be sustained over point-to-multipoint distances up to 40 km even under peak concurrency.
How does QORA maintain performance in heavily congested RF environments?
RADWIN QORA incorporates advanced Multi-RU (Resource Unit) puncturing and active interference-mitigation algorithms. If interference is detected on a portion of the channel, QORA surgically isolates and “punctures” the noisy sub-band while continuing to deliver multi-gigabit traffic across the clean spectrum without dropping connections or requiring a full channel switch.
Can a single QORA sector support both residential users and mission-critical SLAs?
Yes. QORA is engineered for multi-tenant convergence. Operators can deliver best-effort high-speed broadband to residential customers while concurrently provisioning guaranteed SLA bandwidth, CIR (Committed Information Rate), and microsecond-level latency guarantees for business lines, smart cities, surveillance backhaul, and industrial automation on the same physical sector.
What is the commercial release and deployment timeline for RADWIN QORA?
Initial field deployments with select tier-1 partners and operators begin in September 2026. General Availability (GA) worldwide is scheduled for Q1 2027. Network operators and system integrators can contact their RADWIN account managers to participate in early partner trials and technical assessments.
About RADWIN & QORA™
RADWIN is a global leader in carrier-grade broadband wireless solutions, connecting millions of enterprises, telecom service providers, and critical infrastructure networks in over 170 countries. QORA™ is engineered and supported globally with dedicated logistics and staging hubs in Miami (USA) and Manila (Philippines).